Broseley eVolution 7 Insert Instrucciones de operaciones descargar pdf (Pagina 11)

Assembly

Liner Connection

Unbolt the flue spigot from the stove (done by removing the internal baffle to access the

fixings). Connect and seal the 150mm diameter flexible flue liner into the flue spigot, this

can be done by screwing the liner using the 2 holes located in the spigot.

Extra care should be taken to ensure an air tight seal between the liner and the spigot.

(additional rope and or fire cement may be required).

Finally insert the stove into the fireplace and connect the flue spigot to the appliance by

means of the 2 bolts supplied. The spigot fixings are accessed from the inside of the stove.

IT IS RECOMMENDED THAT THIS STEP IS COMPLETED AFTER FIRST SITING THE

STOVE AND ENSURING SECURE POINTS ARE MARKED AND OR DRILLED.

Un-lined Chimney Connection

If the chimney is not being lined it is important that the stove is securely sealed into the

opening (a gas tight seal to BS 8303-1). A 12mm self adhesive rope is supplied to assist

with this, however additional sealant may be required to ensure a sound seal. The seal

needs to continue at hearth level as well as sides and top.

MS11-11 Issue 3 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 29 30

Sin comentarios

Broseley eVolution 7 Insert Instrucciones de operaciones Pagina 11